METAL CLAMPED DOUBLE PLASTIC DISC FILTERS
Datka Plastic Filters, which are indispensable for drip irrigation systems, are located between the pressure source and the lines. The filters used have a great role in extending the life of the laterals, which are the most important component of drip irrigation systems. Datka Plastic Filters extend the life of the laterals with its superior filtering capacity, prevent the formation of pressure difference between the lines and prevent clogging of drippers. Datka Plastic Filters prolong the life of your drip irrigation system and increase the quality of irrigation; It helps to increase the amount of product taken from the unit area and to ensure equal distribution.
THE GENERAL TASK OF FILTERS
- To filter water with little pressure loss,
- Prevent solids from escaping,
- Easily expel solids out of the system,
- The filter returns to its initial position after each backwash and consumes very little water during backwashing.
CHARACTERISTICS OF A GOOD FILTER
- It should filter the water without reducing the water flow rate,
- It should not miss solids,
- It should easily expel the retained solids out of the system,
- It should consume very little water during backwashing,
- It should prevent the proliferation of bacteria.
CONSIDERATIONS WHEN SELECTING A FILTER
- Type of water source (well, lake, pool, etc.),
- The degree of pollution of the water (density ratio of pollutants such as sand, mil or algae),
- Water flow rate,
- Values such as the diameter of the pump outlet should also be taken into account.
| Connection Diameter (Inch) | Product Code | Connection type | Type | Capacity (m³/h) | Filtration Surface (cm²) |
| 3″ | 960-030-01-01 | BSPT x BSPT | Short | 70 | 2670 |
| 3″ | 960-030-01-11 | NPT x NPT | Short | 70 | 2670 |
| 3″ | 960-030-01-02 | V x V | Short | 70 | 2670 |
| 3″ | 960-030-02-01 | BSPT x BSPT | Long | 100 | 3615 |
| 3″ | 960-030-02-11 | NPT x NPT | Long | 100 | 3615 |
| 3″ | 960-030-02-02 | V x V | Long | 100 | 3615 |
| 4″ | 960-040-01-01 | BSPT x BSPT | Short | 70 | 2670 |
| 4″ | 960-040-01-11 | NPT x NPT | Short | 70 | 2670 |
| 4″ | 960-040-01-02 | V x V | Short | 70 | 2670 |
| 4″ | 960-040-02-01 | BSPT x BSPT | Long | 100 | 3615 |
| 4″ | 960-040-02-11 | NPT x NPT | Long | 100 | 3615 |
| 4″ | 960-040-02-02 | V x V | Long | 100 | 3615 |
